Aerial Specialists Inc. USA - AWPT-Inspection Form

Go Back

Small "DRIVEABLE" Slab Scissors Lift Check List

Manufacturer:	Model:			Serial Number:

Condition of Unit:
<-Excellent		<-Good	<-- Fair	<--Poor

Recommended Maintenance Inspection Schedule -->					Daily	Weekly	Monthly	Quarterly	BI - Annual	Annual

Wash Machine							XXXXX	XXXXX	XXXXX	XXXXX

Check Battery Water Level and ADD as Required					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXX

Check Battery Connections for Damage or Corrosion					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check Battery Charger for Proper Operation					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check Hydraulic Fluid Level an ADD (as recommended in Factory Manual)					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

*Grease* ALL Zerks					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

*Lubricate* ALL Scissors Points					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

*Check Hyd Pressure* (Not to EXCEED Mfg. Recommendation in Manual)**							XXXXX	XXXXX	XXXXX	XXXXX

Change Hydraulic Filter - (Return)							XXXXX	XXXXX	XXXXX	XXXXX

Change Hydraulic Filter - (In-Line Pressure)								XXXXX		XXXXX

Change Hydraulic Filter(s) - (In-Tank)								XXXXX		XXXXX

Check Hyd Pump Motor Assy for Fitting Leaks & Noises					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check *Proper Operation Speeds* - (as Recommended in Factory Manual)					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check *EMERGENCY Lowering Valve* Operation					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check for proper *Control Valve* Operation					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check for *Structural Damage & Broken Welds*					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check *Scissors Arm Cross-Shafts* for warp or binding					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check *Scissors Arm Bushings* for Wear and Proper Location					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check *LIFT CYL PIN(s)* for Wear and/or Broken Roll Pins					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check for *LOOSE and/or Missing Set Screw Collars*					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check *Guard Rail Hold-Downs*					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check for *Bent Guard Rails*					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check *Guard Rail Chains and/or Entry Slide Bar*					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check *ALL Hoses and Wire Harnesses for Cuts and Abrasions*					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check *Machine COMPLETE for leaks*					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check *ALL Wiring Connections for Tightness*							XXXXX	XXXXX	XXXXX	XXXXX

Check *ALL Upper Control & Lwr Control Switches for Proper Operation*					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check "*Cord Storage*" Operation - (if applicable)					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check Platform for ORIGINAL Factory Operations Handbook					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check *FRONT END for proper Toe-In and Bushing Wear*					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check *ALL Tires & Rims for Damage*					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check *Wheel Bearings for Lubrication and True Running*						XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check *STEER Cylinder for Leaks & Proper Mounting*					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check *Lug Nuts for Proper Torque* - (as Recommended in Factory Manual)					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check for *Outrigger Operation and Lubricate as Required*					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Ensure that *ALL Safety & Warning Deals & Placards are on unit*					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

*Run Machine thru Several FULL CYCLES to Ensure Proper Operation*					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

*Check "TWO-SPEED" Drive Adjustment - (as recommended in Manual)*					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

*Give THOROUGH VISUAL INSPECTION!*					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Go Back